I came across a news story that gave me a bit of a scare.
In early April, there was news that a state-backed hacking group from a certain country had broken into thousands of home routers and stolen passwords and authentication tokens. And the method was to use the routers as stepping stones, moving around while hiding their own tracks.
“Wait, is my router OK…?” I thought. But according to the article, it didn’t seem to be Buffalo, the brand I use…
What you’ll learn in this post: a cyberattack that used home routers as stepping stones, why someone who runs a Synology NAS at home felt this wasn’t someone else’s problem, and the security points I reviewed.
- 1 In Japan, too, there was a case where a home router was used for a crime
- 2 Why it didn’t feel like someone else’s problem, as someone with a NAS at home
- 3 The risk of using an old router
- 4 What I reviewed
- 5 Changing “I think it’s fine” into “I checked”
- 6 Update: I checked my router again in October 2026
- 7 Why the admin page wouldn’t open: it was Tailscale
- 8 English expressions I learned (B2–C1)
In Japan, too, there was a case where a home router was used for a crime
There was a news story like this in Japan a while ago. Someone broke into another person’s router and made it look as if that person was committing a crime.
It’s less “impersonation” and more “using someone as a stepping stone.” To avoid leaving their own traces, attackers commit crimes by going through someone else’s router. The victim gets a notice saying, “There was unauthorized access from your router,” and there’s a record of crimes they know nothing about.
Structurally, this is the same as the method in this news story: “Hijack a home router and use it as a stepping stone.” The scale and the goals are different, but what they’re doing is the same.
Why it didn’t feel like someone else’s problem, as someone with a NAS at home
I keep a Synology NAS at home and have set things up so I can access it from anywhere through Tailscale.
Because I use Tailscale, the NAS isn’t directly exposed to the internet, which is at least some reassurance. But what about the router itself?
When I asked myself, “I’m protecting the NAS, but what about the router?”, I couldn’t quite answer lol
Using Tailscale doesn’t mean you’re completely safe. Tailscale’s own connections are encrypted, but if the router itself is hijacked, the other traffic passing through it can no longer be trusted. “NAS security” and “router security” are separate things.
The risk of using an old router
Actually, my router is one I bought quite a while ago.
I had changed the admin password. But when did I last update the firmware? When I thought about it, I could hardly remember. Hmm, when was it…
Router firmware doesn’t pop up on your screen saying “Please update” like a phone’s OS update does, unless you log in, so it’s easy to keep putting it off. But I think this is a blind spot that gets targeted. Old firmware can still have known vulnerabilities.
Apparently, hackers don’t bother using newly discovered ways in. They automatically scan for routers where “old holes that are already known” are still open. In other words, it tends to be less “I was hit by some obscure attack” and more “an old hole was left open, so they got in.”
The risks of old routers in a nutshell: known firmware vulnerabilities tend to be left unfixed / once the manufacturer’s support ends, updates stop coming at all / many people still use the default admin password (absolutely don’t)
What I reviewed
After reading this news, here are the three things I did.
① Log in to the router’s admin page and check for firmware updates
It’s often somewhere like “Firmware” or “System update” in the settings. The location differs by model, so searching online might be faster.
② Check the admin password
If you’ve left it as the default admin / admin or admin / password, change it right now. That alone blocks quite a lot of attacks.
③ Consider replacing the router
Honestly, I haven’t done this yet, but if you’ve used a router for several years and the manufacturer’s support has ended, it might be time to replace it. The Wi-Fi standard is old too, and a newer one is surely less of a security risk. If there are services you pay for every month for safety, I think you could think of a router as one of them too.
Changing “I think it’s fine” into “I checked”
Since I started running a NAS as a home server, I thought my security awareness had gone up, but this news made me realize, “I’d actually been putting the router off.”
The difference between “I use Tailscale, so it’s fine” and being able to say “I’ve paid attention to the router too and properly checked the firmware” is small, but I think it matters.
If you run a NAS or a home server and can’t remember when you last checked your router’s security, please take this chance to look at it once. I’ll do it again too lol
Update: I checked my router again in October 2026
About half a year after writing “I’ll do it again too,” in October 2026 I went through my router’s admin page once more. Here are the four things I looked at.
① Automatic firmware updates
Automatic updates were on, and it was on the latest version. It’s set to update automatically in the middle of the night, so I was relieved about this one.
② The admin password
To be honest, I’d set a simple one. This time, I changed it. Some models have limits on admin passwords, like “up to X characters” or “no symbols.” In that case, it’s safest to use a meaningless mix of uppercase letters, lowercase letters and numbers, and keep it in a password manager.
③ Port forwarding and DMZ
Neither was set. Port forwarding lets traffic from outside through to a specific device in your home. DMZ exposes one device in your home completely to the outside. I hadn’t opened any holes to the outside myself.
④ Opening the admin page from outside (remote access)
It was off. The admin page can only be opened from inside my home.
Why the admin page wouldn’t open: it was Tailscale
Actually, at first, when I tried to open the router’s admin page in my browser, nothing showed up. The cause was that I was using Tailscale’s “exit node” on my Mac (a feature that makes my Synology at home the exit point to the internet).
When I turned Tailscale off, it opened properly. Another way is to turn on “Allow Local Network Access” in the exit node menu.
On the same day, I also noticed that Tailscale on my Synology was still an old version from 2024, so I updated it manually. Here’s that story:
English expressions I learned (B2–C1)
I’m aiming for Eiken Grade 1, so I had AI pick out some useful phrases from this topic. They come up a lot when you read security articles in English.
① leave a trail (to leave traces behind)
Hackers route attacks through home routers so they don’t leave a trail.
A “trail” is a track or a trace. It comes up a lot in the context of criminal investigations and surveillance. It’s easy to use if you learn it together with “cover one’s tracks.”
② exploit a vulnerability (to take advantage of a security hole)
Attackers automatically scan for routers with known vulnerabilities to exploit.
A classic phrase in security articles. “Exploit” is also a noun, as in “an exploit” (an attack that uses a vulnerability). You see it in tech news almost every day.
③ compromise (to break into, to take over)
Once a router is compromised, the attacker can monitor all traffic passing through it.
In security, it means being hijacked or breached, as in “My account was compromised.” It also means to meet someone halfway, and “compromise” has so many meanings that it’s one of those words people often mix up.
Source: Russian government hackers broke into thousands of home routers to steal passwords (TechCrunch)
☕ Enjoyed this post?
I'm a Japanese blogger who spent 8 years relearning English from scratch.
If this post helped you, a coffee would mean a lot — thank you for reading!
















Leave a Reply